SHARE C1 PROIMAGE-RICH SURVEYING.
The SHARE C1 Pro brings LiDAR, dual 1-inch cameras, a mechanical shutter and integrated RTK into one handheld platform for colour-rich spatial capture.
A SITE RECORD.
WITH CONTEXT.
Document spaces while moving through them. SHARE C1 Pro combines the geometry of a LiDAR scan with site imagery, giving the office a richer record of what was there.
Existing conditions
Build a record for renovation planning, architectural documentation and project review.
Outdoor coordinates
The integrated positioning system supports outdoor work without a separate antenna rig. Plan project control and verification around the deliverable.
SEE THE SCAN
AS IT GROWS.
Live point-cloud review gives the operator a way to spot incomplete coverage while still on site.
Follow coverage
Use the phone view to inspect the captured area and identify surfaces that may need another pass.
Make the return pass count
Check recesses, doorways and obstructed areas before packing up. A preview helps with coverage; final quality checks still happen after processing.
KEEP THE SURFACE
DETAIL IN VIEW.
Colour helps you interpret the geometry: a doorway, material change or architectural detail is easier to recognize when the point cloud carries its visual context.
Capture while moving
The mechanical shutter helps limit motion-related image distortion during a walkthrough.
Align colour with geometry
SHARE describes hardware synchronization between capture systems to improve colour alignment. The cameras support interpretation; measurement depends on the reconstructed geometry.
HANDHELD TODAY.
PLAN OTHER PLATFORMS.
SHARE illustrates handheld and robotic mounting options for C1 Pro. Choose the capture platform around access, route length and the conditions on site.
Walk accessible spaces
Use the handheld configuration where the operator can safely reach the required viewpoints.
Discuss a mounted workflow
Confirm the mount, platform integration and package contents before planning robotic or vehicle deployment.
MAKE THE DATA
USEFUL TO THE TEAM.
Transfer compatible SHARE projects into PointClouds Studio for processing and review. Choose the output that matches the next stage of work.
Measure and inspect
Review point clouds, extract sections and check the spatial record.
Prepare the handoff
Create visual 3DGS scenes or editable CAD drafts where supported. Draft drawings need professional review and refinement.
SHARE C1 PRO
SPECIFICATIONS.
The detailed figures in one place. These are manufacturer specifications; actual results depend on the site, capture method and processing.
- Point rate
- 200,000 points/second
- Measurement range
- 0.1–40 m at 10% reflectivity; 0.1–70 m at 80%
- Relative accuracy
- Better than 1 cm
- Absolute accuracy
- Better than 5 cm
- Point-cloud thickness
- Within 1 cm
- Cameras
- 2 × 16 MP; 1-inch sensors
- Shutter
- Mechanical / electronic
- RTK
- Built in; horizontal 0.8 cm + 1 ppm, vertical 1.5 cm + 1 ppm
- Processing
- Real-time and post-processing
- Weight
- 1,079 g
- Single battery life
- Approximately 150 minutes
- Storage
- 256 GB, expandable
- Charging
- USB-C, PD 30 W
- Operating temperature
- −20°C to +50°C
Source: SHARE manufacturer specifications, checked October 6, 2026. RTK positioning figures are separate from point-cloud accuracy.
PLAN THE COMPLETE
WORKFLOW.
Will the scan become a finished CAD or BIM model automatically?
Treat the capture as source data. PointClouds Studio can support CAD draft generation, but drawing refinement, modelling and acceptance checks remain part of the project workflow.
What should I bring to a product discussion?
A description of the site, access constraints, required coordinates, target deliverable and the software your team uses. A representative sample area helps establish what needs to be demonstrated.
What happens when satellite positioning is limited?
Plan control and trajectory checks for indoor spaces, obstructions and transitions. Built-in RTK does not remove the need to verify the processed result against the project requirements.
START WITH
YOUR PROJECT.
Tell us what you need to capture and deliver. We can discuss the scanner, software and field setup together.
Bring the site
Indoor or outdoor, size, access and challenging surfaces.
Bring the deliverable
Point cloud, CAD reference, design model or visual documentation.